Microcement
One-component microcement is a thin decorative coating. With the cement and other materials in a powder form and mixed with water at the time of use, it is also referred to as single component microcement.
Applied by hand in thin layers to create a tonal and tactile continuity, the final appearance of this coating is dependent upon the finish and colour selected, method of application and the sealer used.
A comprehensive system includes the preparation of the surface to be coated, an appropriate base coat and the relevant protection. The performance of a decorative surface coating will differ according to the substrate being prepared, the surface finishes chosen and the protection applied. A wall, a floor and a wet area will require different products and preparation.
n where it will be used and the condition of the existing surface.
Different textures allow you to create anything from a fine wall finish to a more textured floor. Colours can be chosen to work with wood, stone and other materials, helping connect the design across kitchens, bathrooms and living spaces.
Good preparation and correct application help the finish perform well over time. Each layer must be applied according to the product instructions, and a suitable sealer protects the surface from moisture and dirt. Regular cleaning with a neutral-pH cleaner helps maintain its appearance.
Microbase is the preparation coat used before the finishing layers. Its role is to create an even base for the chosen wall or floor finish.
For a soft, refined wall texture, choose a fine finish such as Microfino. Its subtle pattern works well as a feature behind a sofa, bed or other focal point. Consider the colour alongside the room’s light and furnishings. A fine wall coating should be used only for the surfaces approved in its product data sheet.
For a floor, select a finishing product intended for foot traffic, such as Microdeck. Pair it with the specified base coat and floor sealer. Plan the complete floor system around the room’s use. Entrance areas, living spaces and wet zones can have different needs for surface protection, texture and slip resistance.
| Property | IFTIKA MICROBASE | IFTIKA MICROFINO | IFTIKA MICRODECK |
|---|---|---|---|
| Flexural strength | — N/mm2 (28 days) | — N/mm2 (28 days) | — N/mm2 (28 days) |
| Apparent density |
Powder: — kg/m3 Paste: — kg/m3 Hardened: — kg/m3 |
Powder: — kg/m3 Paste: — kg/m3 Hardened: — kg/m3 |
Powder: — kg/m3 Paste: — kg/m3 Hardened: — kg/m3 |
| Compressive strength | — N/mm2 (28 days) | — N/mm2 (28 days) | — N/mm2 (28 days) |
| Substrate adhesion | — N/mm2 (28 days) | — N/mm2 (28 days) | — N/mm2 (28 days) |
| Material consumption | — kg/m2 | — kg/m2 | — kg/m2 |
| Packaging | — kg bucket | — kg bucket | — kg bucket |
Prepare the surface and apply the specified primer. Add reinforcing mesh where required.
Apply the first Microbase coat. Allow it to dry and sand as directed.
Apply a second Microbase coat where specified, adding pigment if required. Dry and sand as directed.
Apply the first coat of Microfino for walls or Microdeck for floors, using the specified pigment.
Apply the next finishing coat where specified. Follow the required drying and sanding steps.
Apply the specified pre-sealer, if required, before the protective topcoat. Follow its drying instructions.
Apply the approved protective sealer and allow the full system to cure before use.
TAKE THE NEXT STEP
Planning a feature wall, a new floor or a renovation? Share the surface type, approximate area and finish you have in mind with IFTIKA. Include whether the area will be exposed to water so the proposed system can be assessed properly.
